DecoGlaze 19mm Worktops
Luxurious, durable and luminous, the 19mm worktop adds a beautiful elegance to any project.
Our glass worktops are extremely easily to clean, very hard to stain and scratches for the most part can be easily and inexpensively repaired.
Glass worktops are also non-porous, making them hygienic, strong and flexible with the opportunity for a 400mm unsupported overhang for a breakfast bar.
DECO GLAZE works to very low tolerances, so worktops will have minimal joints and cuts.
We can also add in radius corners making them safe for children.
Lustrous, Lasting and Beautiful.
We offer an unrivalled 10-year guarantee against discolouration and delamination when fitted by one of our local professional installers.
Easy to maintain, it overcomes the issue of discoloured grout that may occur with other products.
19mm Worktops TECHNICAL SPECIFICATION
- Glass thickness:
- Sheet size:
3200mm x 1800mm
- Maximum overhang:
- Cutouts for sinks & hobs:
40mm from the edge
- Recommended Use:
Worktops for Receptions, Kitchens, Bathrooms, Bar Tops
Available in opticlear gloss finish with opaque
- Worktops can be printed in any design. Choose from our collection of thousands on www.shutterstock.com
- For printed glass please allow an extra 5 working days
- Worktops are toughened
Non porous, heat shock resistant (up to 200°c), stain, acid, chemical and water resistant
- Scratches can be easily repaired
10 years against discoloration and delamination
- Buying Options:
Available as supply only, full service or collection from the Deco Glaze factory
- 10-15 working days lead time
Click below to download the brochure:
We advise the viewing of samples in the glass thickness of your order with the final lighting conditions in the intended area of installation.
Every effort was made to ensure perfect colour reproduction but owing to different screen resolutions the colours shown below may not match exactly.
The paint that will be applied to the back of the glass will be matched to the requested colour and therefore the colour may vary when looking through the glass due to the glass thickness and the light reflection on the glass.
Although we use Opticlear low iron glass that is very clear, the glass may still have some colour that will affect the overall look of the worktop or splashback colour.
We do colour matching by scanning a colour chart or a paint sample with a spectrophotometer that produces a colour reference. The paint is then mixed electronically according to the reference.
The colour reading from the spectrophotometer can have some tonal difference from the sample supplied.
We will always supply a sample with a colour match order to ensure you are happy with the final result.
Please note the small samples we produce let in more light than a larger piece of glass so the colour of the actual splashback or worktop may have a slight tonal difference to the sample.