DecoMatte is our smooth and scratch resistant decorative matt colour back painted toughened glass range.
Our frosted glass splashbacks, worktops and wall panels are ideal for bathroom and kitchen design project.
With all the colour choices in the DecoGlaze and DecoLuxe available, why not add a touch of elegance in any kitchen or bathroom with DecoMatte.
Our Matte glass has all the benefits of DecoGlaze: easy to maintain, minimal joints and hygienic.
More scratch resistant than DecoGlaze, DecoMatte offers a beautifully smooth option for a more contemporary and sleek finish.
We offer an unrivalled 10-year guarantee against discoloration and delamination when fitted by one of our local professional installers.
Easy to maintain, it overcomes the issue of discoloured grout that may occur with other products.
There is a very slight colour tonal difference between 10mm and 6mm glass.
DecoMatte TECHNICAL SPECIFICATION
- Glass thickness:
- Sheet size:
3200mm x 1800mm (6mm)
3200mm x 1800mm (10mm)
- Recommended use:
Splashbacks and worktops for Receptions, Kitchens,
Bathrooms, Bar Fronts and Tops, Wall Cladding, Leisure
Centres and Gyms, Shower Screen, Office, Hotels,
- Available as supply only, full service or for collection from the Deco Glaze factory
- Deco Glaze Opticlear glass is used for minimal
- Non Stick easy to clean DecoShield treatment can be
applied to DecoMatte
- Splashback and Worktops are toughened and
withstand up to 200°c heat
- 10-15 working days lead time
Non porous, heat shock resistant (up to 200°c), stain, acid, chemical and water resistant
10 years against discoloration and delamination
Click below to download the brochure:
Our tried and tested classic range of colours are now available in DecoMatte, a satin textured glass.
Beautifully soft and scratch resistant, DecoMatte uses Opticlear glass with minimal colour distortion.
We advise the viewing of samples in the glass thickness of your order with the final lighting conditions in the intended area of installation.
Every effort was made to ensure perfect colour reproduction but owing to different screen resolutions the colours shown below may not match exactly.
The paint that will be applied to the back of the glass will be matched to the requested colour and therefore the colour may vary when looking through the glass due to the glass thickness and the light reflection on the glass.
Although we use Opticlear low iron glass that is very clear, the glass may still have some colour that will affect the overall look of the worktop or splashback colour.
We do colour matching by scanning a colour chart or a paint sample with a spectrophotometer that produces a colour reference. The paint is then mixed electronically according to the reference.
The colour reading from the spectrophotometer can have some tonal difference from the sample supplied.
We will always supply a sample with a colour match order to ensure you are happy with the final result.
Please note the small samples we produce let in more light than a larger piece of glass so the colour of the actual splashback or worktop may have a slight tonal difference to the sample.